The material enters the machine from the inlet of the feed. Under the action of the vibration force, the material is thrown along the fluidized bed of the horizontal plane and moves forward continuously. The hot air passes through the fluidized bed and exchanges heat with the wet material, and the humid air is removed by the cyclone. Exhausted by exhaust 1:3. The dry material is discharged from the discharge inlet.
Calcium bicarbonate dryer Adaptable materials:
It is suitable for drying and cooling of powdery and granular materials in chemical, pharmaceutical, food, dehydrated vegetables, grain, minerals and other industries. Such as: citric acid, monosodium glutamate, borax, ammonium sulfate, compound fertilizer, dill, silk, soybean meal, distiller's grains, seeds, slag, sugar and so on.
Calcium bicarbonate dryer Features:
◎The vibration source is driven by vibration motor, which is stable in operation, convenient in maintenance, low in noise and long in life.
◎The fluidization is well-proportioned, and there is no dead space and blow-through phenomenon, so that uniform drying and cooling of the product can be obtained.
◎ Good adjustability, suitable for wide surface. Stepless adjustment is achieved by layer thickness and movement speed in the machine as well as full amplitude changes.
◎The damage to the surface of the material is small. It can be used for the drying of fragile materials. When the material particles are irregular, it will not affect the working effect.
◎ adopts a fully enclosed structure. It effectively prevents cross-infection between materials and air, and the working environment is clean.
◎ High mechanical efficiency and thermal efficiency, good energy saving effect, energy saving 30-60% compared with general drying equipment.
Overview of calcium bicarbonate:
Calcium hydrogencarbonate is an inorganic acid salt. It is easily soluble in water, and calcium hydrogencarbonate can be obtained by reacting sodium hydrogencarbonate with a calcium salt which is easily soluble in water. Calcium hydrogencarbonate is relatively stable below 0 degrees Celsius; it is easily decomposed at room temperature to obtain calcium carbonate solids.
Briefly explain why fluidized bed equipment is preferred by users:
The fluidized bed equipment is a batch system. The loading and unloading of the pallet is usually manually operated and labor intensive. The system has developed into a structure called a tunnel, which is generally indexed continuously by the floor drive device. The operation is faster and very popular with users.
Vibrating Fluidized Beds Manufacturers Introduction Fluidized bed equipment is continuously operated, but it is still necessary to intermittently insert new carts before continuing to dry and remove the products. You can add systems to automatically load, stack, and empty trays, all of which can enhance your approach to a continuous conveyor drying system.
At the same time, the dryer can dry various feeds in liquids and slurries into granules, agglomerates and solids (objects), which are very suitable for small volumes, and sometimes prove to be economically feasible and load-bearing.
At the same time, its residence time is infinitely controllable. The high variance of the initial humidity can be adjusted by adjusting the residence time, the temperature can be controlled very effectively, and the slope and immersion performance can be provided for applications requiring it. The strategic placement of most controls The thermocouple is connected to a solid state temperature controller that regulates the heat source to achieve the desired operating temperature.
Designed to meet demanding applications, it can be designed to raise temperatures up to about 600 degrees. Pallets, internals and even entire units can be made from advanced materials, including various grades of stainless steel, which are usually insulated and coated. Reduce heat loss.
Vibrating fluidized bed manufacturers generally do not need any dust collection, and the required air flow and associated speed reduce the possibility of entrainment and reduce carryover. However, if the product is very delicate, you can install a vacuum cleaner and control the emissions.
