SZG-2000 double cone rotary vacuum dryer Product overview:
SZG double cone vacuum dryer is a new generation drying device developed by our factory in combination with domestic similar product technology. Double cone vacuum adopts belt-chain two elastic connection method, so the equipment runs smoothly. The specially designed process fully embodies the good concentricity of the two shafts. The heat medium and vacuum system use reliable mechanical seals or American technology rotary joints. On this basis, we have developed SZG-A which can be used for both stepless speed regulation and constant temperature control.
As a professional drying equipment manufacturer, our products are made from high-temperature heat-conducting oil, medium-temperature steam and low-temperature hot water. When drying viscous materials, the factory will specially design a [copy board" mechanism or set balls in the tank.
SZG-2000 double cone rotary vacuum dryer Working principle:
◎Into the closed interlayer, heat energy (such as hot water, low-pressure steam or heat-conducting oil) is introduced, and heat is transferred to the dried material through the inner casing.
◎ Under the power drive, the tank body rotates slowly, and the materials in the tank are continuously mixed to achieve the purpose of strengthening and drying.
◎The material is in a vacuum state, the vapor pressure drops so that the water (solvent) on the surface of the material reaches a saturated state and evaporates, and is discharged and recovered in time by a vacuum pump. The water (solvent) inside the material continuously permeates, evaporates and discharges to the surface, and the materials are continuously dried in a short time.
SZG-2000 double cone rotary vacuum dryer Adapt to materials:
It is suitable for the concentration, mixing, drying and low-temperature drying of powders, granules and fibers in chemical, pharmaceutical and food industries (such as biochemical products). It is more suitable for drying of materials that are easily oxidized, volatile, heat sensitive, strongly irritating, toxic materials and materials that are not allowed to damage crystals.
SZG-2000 double cone rotary vacuum dryer Features:
◎ When the oil is heated. Automatic constant temperature control. Can dry biochemicals
◎ and mineral raw materials, the temperature can be between 20 ~ 160oC.
◎ High thermal efficiency, more than 2 times higher than the average oven.
◎ Indirect heating. The material will not be contaminated and meet the requirements of [GMP". Equipment maintenance is easy and easy to clean.
◎Recommended process placement demonstration solvent recovery process placement.
What are the advantages of the double cone rotary vacuum dryer?
The double-cone rotary vacuum dryer is a double-cone rotary can body. Under the vacuum state, the tank is heated by steam or hot water, and the heat is contacted with the wet material through the inner wall of the tank, and the wet material absorbs heat and evaporates. The water vapor is pumped away through a vacuum exhaust pipe through a vacuum pump. Since the tank body is in a vacuum state, and the rotation of the tank body causes the material to continuously turn up and down, the material drying speed is accelerated, the drying efficiency is improved, and the uniform drying is achieved.
The double cone rotary vacuum dryer has the following advantages:
1. Efficient and conventional vacuum drying equipment is heated by steam. It needs to be heated from the inside to the outside. The heating speed is slow and it takes a lot of coal. The double cone rotary vacuum dryer uses electromagnetic wave heating, no heat transfer medium is needed. Heating to the inside of the object, the heating rate is fast, 1 kW can be used in 3-5 minutes. The water and vacuum dryer at normal temperature is facing the integration and upgrading technology management is the key heat to 100 °C, avoiding the above shortcomings, so the speed is fast and the efficiency The high and dry cycles are greatly shortened and the energy consumption is reduced. .
2, heating evenly due to heating, the material is heated simultaneously from the inside to the outside, the temperature difference between the inside and outside of the material is very small, does not produce the situation of internal and external heating inconsistent in the conventional heating, resulting in a puffing effect, which is conducive to smashing, drying The quality has been greatly improved.
3, easy to control, easy to continuous production and automation.
4, the preparation volume is small, easy to install and maintain.
5, the product quality is good, compared with the conventional method, the quality of the processed products has been greatly improved.
6, with disinfection, sterilization, product safety and health, long shelf life.
7. The economic benefits are significant.
SZG-2000 double cone rotary vacuum dryer Equipment parameters:
1. One host;
2. Please call for details of the configuration list.
